8 Tips To Increase Your Ghost Immobiliser Problems Game

From BSI new
Jump to navigation Jump to search

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft by using the Ghost Immobiliser. This system is discreet & doesn't require additional key fobs to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to create a unique pin code sequence that can be altered up to 20 times. This then authorizes the startup of your vehicle.

Simple PIN Code Change Process

With the rising rate of vehicle thefts, many owners are seeking to improve their security. There are many kinds of aftermarket security devices that range from tracking systems to alarms and immobilisers. Not all of them are equally effective at protecting your car. While a tracking system may help you find your car in the event of theft, it does not prevent the crime from occurring in the first place. Immobilisers, however, do exactly what is a ghost immobiliser they state on the label - they disable your car's motor so that it isn't able to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your car.

The ghost device utilizes the buttons on your car to create an unique sequence that needs to be entered in order for the engine to begin. This can be done by using the heater, window or indicator stalk buttons. In addition, there is also an app for mobile devices that can act as an emergency PIN code override, allowing the driver to operate the car without using the button sequence. This feature is particularly useful when you need to surrender your car to a valet service or parking since the immobiliser will remain activated and not disabled.

The ghost car immobiliser is an unique and innovative device that operates with the buttons of your vehicle instead of as a standalone unit. This means that it's not only a highly effective security measure against theft from your vehicle but it can also be transferred to any future vehicles you have, making it more valuable than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser is an advanced security system that guards your vehicle from key cloning, Ghost Immobiliser Near Me hacking & ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly via the CAN bus to disable the motor. It can be fitted into the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are an approach used frequently by thieves to get around the immobilisers in place.

The advantage of CAN data over traditional systems is that they work silently. It's not detected by sophisticated RF scanning or code-grabbing technologies and is likewise unreadable by conventional diagnostic tools. The Autowatch ghost immobiliser near me (Suggested Internet page) doesn't produce LEDs, but instead utilizes the buttons inside your vehicle such as steering wheel or centre console panels to create a unique, customizable disarm sequence. This sequence can be extended to up to 20 presses for extra security. The iPhone app only allows one connection, using a unique pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost also stops car thieves from using a new key or replacing the ECU to bypass the immobiliser to start the engine. The engine can only be started if a valid PIN code is entered. It is possible to operate temporarily in the Valet/Service mode (with parameters set, such as a 30mph speed limit) and, therefore, you can give your car to a valet or service without having to enter an entry code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device intercepts signals to prevent your car from operating normally until you enter a custom code. The system can be turned on and off by using your smartphone's app without the need for additional wires.

Standard factory immobilisers in vehicles function by using a transponder inside the key, which sends an electronic signal to the ECU. The car will begin to start if the correct code is sent. If, however, the transponder from another vehicle is used instead, the immobiliser will not recognise it. This allows the vehicle start and be stolen. A South African company that is at the forefront of vehicle safety systems technology developed the Ghost immobiliser. It shields you from hacking or key cloning and even key theft. Only by physically towing your vehicle away from thieves could they take it away, and they would still not be able drive it.

Ghost uses the buttons in your car, such as the indicator stalk, steering wheel and door panels to create an individual, changeable PIN code sequence that must be entered prior to you can use your car. This is not required to use additional hardware like key fobs and can be up to 20 presses long. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals, so thieves are unable to use sophisticated RF scanning or code grabbing techniques to discover that security systems have been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks, Ghost is concealed within the vehicle to ensure that it can't be removed or disabled by thieves. It is also harder to remove than a car alarm that requires disarming via a button sequence. This makes it a fantastic alternative to a GPS tracking device which can be used to locate your vehicle after it's stolen.

Emergency PIN code override

You do not have to look far on social media sites to find stories or even videos of vehicles that have been stolen by car thieves using the latest technology tools available to them. This includes key-cloning devices and hacking devices that allow the vehicle to start without the original key fobs.

Our Ghost immobiliser is designed to stop this and offer an extra layer of security to keep your vehicle from being targeted by thieves. It creates an unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel, and the center console. The unique pin code is entered alongside the original key fob to prevent the engine from beginning. The unique override pin can be found on a black plastic card that you receive following your installation. It is simple to remember because there are no LED indicators.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, which means it can't be recognized by thieves using diagnostic software that is able to detect the type of security system you have installed. This makes it a great alternative to a tracker.

Contrary to most security systems, which have a relay in the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely with an electronic block of commands for both the ECU and the engine.

It is also possible to connect an analogue immobiliser, alarm or tracker with these systems, but this has to be stated prior to the installation of the device. They also work with service/valet modes and an excellent alternative to a tracking device when you take your car into the dealer for an electrical issue.

Service/Valet mode

In recent years, there has been a increase in vehicles that are stolen without owners' keys. It's now easier than ever before to take your joy and Ghost Immobiliser Near Me pride with the availability of key cloning devices and door lock picks. To stop this, we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your vehicle has been stolen.

It connects directly to your car's ECU (Engine Control Unit) through the CAN data loop. It's completely silent as it doesn't use radio frequency or a key fob. This means it isn't detected by diagnostics or any other car hacking devices. It also prevents the user from using a new ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is concealed inside your car by using buttons on the steering wheel, the centre console and door panels. A unique and reversible PIN code sequence up to 20 digits must be entered prior to being able to start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car from being started or driven away if a PIN code isn't entered prior to. If the device is armed and you attempt to drive away, it will display an indication on your dash, which will flash on a regular basis for approximately 300m, if you enter your PIN code during this time, it will deactivate the anti-hijack and your car will continue to operate just as normal. If you don't enter your PIN code at this time the indication will keep flashing & will require a new PIN code for every attempt to start your vehicle.